Tag: "microinverter"

11/07/18

  07:17:00 pm, by Jim Jenal - Founder & CEO   , 704 words  
Categories: All About Solar Power, Residential Solar, Solar Repairs

Enphase announces Upgrade Program for Early Adopters...

One of the nagging concerns in the solar industry is what to do about those aging legacy systems?  As systems age there can be reliability issues and finding compatible parts can be a real issue in a fast moving technology environment like solar power.  Given all of that, we are pleased to announce the Enphase Update Program for Enphase Early Adopters.  There is a lot to this program, including three distinct upgrade paths, so let’s break it down step-by-step…

Who is Eligible?

This program is dedicated to the earliest adopters of Enphase microinverters, specifically the M175, D380, M190, and M210 models.  (Of the eligible microinverter models, Run on Sun only ever installed the M210.)  System owners that have M215’s, M250’s, or S280 microinverters are not eligible for this program.

Enphase M210 microinverter Enphase M215 microinverter
The Enphase M210 qualifies for the upgrade… While the subsequent generation M215 does not.

What are My Options?

There are three upgrade paths with varying benefits, costs, and timing, however, all three offer full 25-year product warranties and a two year service agreement. The three options are: Microinverter Upgrade, Full-System Upgrade, and Next-Generation Upgrade - let’s take them one at a time.

Microinverter Upgrade

The most cost-effective option is the Microinverter Upgrade because it takes advantage of your existing solar panels that are likely still in good shape.  This upgrade provides all of the following:

  • New Enphase IQ7-PD - the latest generation microinverter, powered down to be compatible with existing, earlier generation systems.
  • New interconnection cable
  • New IQ Envoy with both production and consumption energy measuring devices* (CTs).

Legacy owners can purchase this equipment directly from Enphase for just $67.50/panel - a really great price.  Removal and re-installation labor will vary widely based on various factors including the difficulty of the roof, the quality of the original installation, and whatever upgrades need to be done, probably on the order of $150/panel.

*Note that not all systems will be able to do consumption monitoring depending on the existing service panel configuration.

Full-System Upgrade

When microinverters like the M210 were being installed, available panel wattage was much lower than today, but with the advent of electric vehicles, homeowners are in need of more energy than ever.  The Full-System Upgrade provides a way to gain from today’s higher power modules, but in a cost-effective manner.

Solaria-Enphase AC module

Enphase Energized Solaria PowerXT-AC Modules

This upgrade path involves the Enphase Energized Solaria PowerXT-AC Module, which has an Enphase IQ7+ microinverter integrated onto the Solaria module. (You can see an image of the Solaria modules on the left.)

 The module has a power production of 295 Watts, substantially greater than what was available for legacy modules.   The cost to the homeowner for this upgrade path is $469/panel, which includes the AC module, cabling, and the Envoy for monitoring.  

Labor costs for this upgrade path are likely to be substantially higher, in part due to the need for new racking (the module dimensions are somewhat unusual - 63.8″ x 43.9″ - which could necessitate a racking change), changes in the sizing of the branch circuits, and the need to pull permits for the new system.  Those factors are mitigated somewhat by the upgrade cost most likely qualifying for the federal 30% tax credit since it is an all new system, as opposed to the Microinverter Upgrade, that won’t.

Next-Generation Upgrade

Finally, the last upgrade option is to wait for the rollout of the Enphase IQ8 microinverter system.  (You can read about what the IQ8 technology will provide here.)  Unfortunately, there is no pricing information available yet for that upgrade path, and its availability is not until sometime in 2019 - probably the second quarter at the earliest.

What Happens if I do Nothing?

If your system is working fine, you don’t really have a need to do anything.  However, these earlier microinverters came with a 15-year warranty, which means that more than half of that warranty period has expired.  Moreover, particularly compared to the M190’s, the newest Enphase microinverters have significantly greater reliability (Enphase claims by an order of magnitude), so you would be upgrading to a more reliable product and extending your warranty protection by 25 years.

We will post again when we have more information regarding the Next-Generation, IQ8  upgrade.  In the meantime, if you have questions about upgrading, please give us a call.

 

 

 Permalink

08/27/13

  12:48:00 pm, by Jim Jenal - Founder & CEO   , 552 words  
Categories: Residential Solar, Ranting

Try Doing That with a String Inverter!

There is a vigorous debate among solar installers about the relative merits of microinverters, such as those made by Enphase Energy, versus those of string inverters, such as those made by SMA. We can’t claim that we have resolved that debate once and for all, but our experience this past week reaffirms our confidence in the microinverter choice.

Almost exactly a year ago we did a residential installation at a seriously shaded site.  We explained in detail to the homeowners about the reduced yield that any solar power system would provide given just how much shading they had, but they were still eager to press forward.  The shading mandated that we use microinverters, and they were excited to see how their system would perform using the Enlighten monitoring system.

In addition to the shading, there was another limitation - a 150 Amp service meant that we couldn’t install as big a system as they needed.  However, they were about to embark on a six-month renovation of the home and as part of that they were going to upgrade the service.  We decided to build the first half of the system right away and include the additional infrastructure that would be needed for the later addition - down to the standoffs on the roof.

Here’s how the install looked a year ago:

First phase of project completeAs you can see from the photo, there really is substantial shading present - and you can also see our Unirac standoffs waiting for Phase II.  Sitting on top of those Enphase M215’s are LG 250 Watt solar modules - our preferred product at that time.

Fast-forward to this past week.  We are still using M215’s but LG has moved up the curve and the new modules for the second phase of this project are 280 Watts each.  The homeowner wanted the higher power modules incorporated into the existing system, and they wanted them installed not on the open bottom row, but wherever they would be able to get the greatest amount of sun to maximize their return on investment.

The first great advantage of having microinverters on this project then was the ability to combine significantly different power modules into the same array.  But the second goal - placing the new modules in the ideal locations - was one that we could only solve with confidence thanks to the Enphase Enlighten data.  Indeed, all we had to do was go to the monitoring page for this site and request the display of lifetime energy.  Here’s how that looked:

lifetime energyNow isn’t that interesting?  There is a huge difference going from the NW corner down to the SE.  Overall, taking the top row along with the three west-most modules from the second row seemed like our best plan.

Here is how the expanded array looked after we completed the install:

expanded arrayPretty easy to see where the new panels were installed - they are the bright shiny ones!  (The break in the bottom row is to avoid the utility service mast.)

Here is how the new system performed yesterday (after the old panels were cleaned!):

yesterday's energy yieldOur higher power modules are installed in the optimal locations, thanks to the ability to mix and match modules in the array, combined with the ability to know at the module level where are our best performing slots in the array.

Trying doing that with a string inverter!

Jim Jenal is the Founder & CEO of Run on Sun, Pasadena's premier installer and integrator of top-of-the-line solar power installations.
Run on Sun also offers solar consulting services, working with consumers, utilities, and municipalities to help them make solar power affordable and reliable.

Ready to Save?

Let’s Get Started!

Give Us a Call!

626.793.6025 or
310.584.7755

Click to Learn More About Commercial Solar Power!

We're Social!



Follow Run on Sun on Twitter Like Run on Sun on Facebook

Search

Run on Sun helps fight Climate Change
Photo albums software